Tea is 99% water, making its quality of paramout importance. The best of teas will taste worse than ordinary if prepared with unfiltered tap water. As such, we recommend steeping all our teas with spring or filtered water.

The advantages of GraviTEA are economy and speed. It costs a fraction of the cost of bottled water and filters liquids at twice the rate of comparable systems.

How to Use
At its center is a replaceable filter cartridge. To prepare for use, we recommend soaking in water and moving briskly from side to side as illustrated on its packaging.

Once complete, insert the filter at the bottom of the inner compartment and fill the cavity with water. The first batch may contain charcoal remnants. Simply pour out and repeat. Your filter is now ready to yield crystal-clear water.

Assembly
The inner compartment has an end that is round and one that is more linear. Please ensure that the linear one is facing the front. Otherwise, you may find the lid difficult to snap in place. Rotating the compartment 180 degrees will yield better results.

The easiest way to remove the lid of the GraviTEA is to lift from the front of the lid.

Apply light pressure as you pull the front up and away from the handle. There's a notch in the back of the lid that goes into the handle that makes it more difficult to remove the lid from the middle or the back.

To put the lid back on, slide the notch into the handle and apply light pressure from the handle to the spout to set the lid in place once more.

Timer Use
Please remember to change the cartridges every 60 days. The electronic display is a handy reminder of this. Please depress the reset button for three seconds to signal the placement of a new cartridge. Pressing the button afterwards will illuminate its remaining life. The graph will flash hollow upon the cartridge reaching the end of its 60-days life, signaling that it needs a replacement.